How To Repair Corrupted Pen Drive simple methods

Repair corrupted SD card or Pen Drive using Windows comment prompt

1. Connect the corrupted pen drive or SD card to your computer.
2. Hover your mouse on the Start button and Right Click.
3. Click Command Prompt (Admin). A CMD window will open.
4. Type diskpart and press Enter.
5. Type list disk and press Enter. A list of all the storage devices connected to your computer will be displayed.
6. Type select disk <the number of your disk> and press Enter. (Example: select disk 1). Important: Make sure you enter the number correctly. Otherwise, you may format your internal hard drive. You can type list disk again to check whether you are going correctly. There will be a star (asterisk symbol) before the name of the selected disk.
7. Type clean and press Enter.
8. Type create partition primary and hit Enter.
9. Type active.
10. Type select partition 1.
11. Type format fs=fat32 and press Enter. The format process will finish in a few minutes. You can write ntfs instead of fat32 if you want to carry files larger than 4 gigabytes.

Reinstall the drivers windows

There are times when the drivers that run your pen drive get corrupted and our PC will not be able to detect your storage media. You can reinstall drivers by these simple steps:

1. Right click My Computer/ This PC. ClickManage.
2. Click Device Manager on the left side.
3. Double-Click Disk Drives in the list. Right Click on the name of your pen drive.
4. Click Uninstall. Click Ok.
5. Disconnect your storage media and restart your PC.
6. Connect your pen drive again. Your PC will detect it.

Repair corrupted SD card or Pen Drive using Windows Explorer(easy method)

This is the most commonly used procedure to repair a connected storage media to your computer.

1. Open My Computer or This PC.
2. Select the corrupted drive and Right Click.
3. Click Format in the drop down menu.
4. Click Restore Device Defaults in the popup window.
5. Click Start to begin the format process. You can uncheck the Quick format option if you want the computer to deep scan the drive/card for errors but this will take time. So, uncheck it only if you fail in the first attempt.
6. Click Ok in the next dialog box which will warn you that the data will be lost. The format process will complete in a few moments, and you will have your error free SD card or pen drive.

The three methods are best simple way to corrupted pendrives in works¡¡¡